JESEL Valvetrain Innovation

Pivot Length Gauge
Used to determine what body pivot length a rocker body has.

Spring Removal Tool
Mounts to the stands and is used for quick, easy spring removal. Available for most stand/shaft arrangements.

Pushrod Length Checker
Used to determine the correct pushrod length once the stand height is set and is included in all Jesel rocker arm kits. These Modular kits are easy to use and extremely accurate.

Torx Sockets, 3/8" Drive
Available in a wide range of sizes and are used for shaft bolt installation/removal and some belt drive components.

Stand Height Gauge
Critical tool for establishing the proper location of the rocker pivot length in relation to the valve tip.

Logan Smith Machine Tools -

Valve Spring Pressure Tester
This adjustable on-head valve spring pressure tester features a 0-600lbs liquid filled gauge. The included adjustment shim kit enables adjustment to within .050 of rocker arm pivot length. Also includes setup and adjustment guide.

Valve Last Torque Wrench
The TOL-TQ100-2 is a precision torque wrench and valve lash adjuster tool. It's important to torque rocker arm adjuster nuts precisely when setting valve lash. An over-torque or under-torque condition on your rocker arm adjuster nuts can cause problems for your valvetrain. The TOL-TQ100-2 makes it easy to set your valve lash precisely and torque the adjuster nut to the proper setting, helping to eliminate potential valvetrain failures.

Bushing Alignment Checker
A good way of checking to make sure the bronze bushings in a race block are installed properly and/or have not moved during the racing season. It is a wise idea to check the bronze bushings whenever your engine is torn down for optimum performance and longevity.

Sonic Belt Tension Meter

�

Keyway Bushing Installation Tool
Used to install and properly align keyway bushings in engine blocks so keyway lifters can be used. Available in a hydraulic or manual version.

Extreme Pressure Lube
For proper pushrod to adjuster cup break-in, JESEL strongly recommends the use of this high pressure lubricant.

Valve Lash Adjusting Wrench
A simple way of setting valve lash by easily loosening and tightening the rocker jam nut. This tool also eliminates the possibility to over torque the jam nut.

Cam Adapter Spanner Wrench

Lower Pulley Installer

Chrysler 426 Hemi� Drill Jig